1. Prepare Your Case 🧼

Start by ensuring your phone case is clean, dry, and free from any dust, moisture, or grease. A clean surface helps the charms stick better and last longer.

2. Plan Your Layout ✨

Before peeling anything, lay out your BLNGZ charms on the case to visualize your design. This way, you can perfect the placement before sticking them on.

3. Peel the Adhesive 🔖

Carefully remove the 3M adhesive backing from your charm — tweezers can help for better precision.

4. Stick Your BLNGZ 📌

Press each charm firmly onto your chosen spot on the case. Apply even pressure to ensure a strong hold and reduce any air bubbles.

5. Lock It In 🔒

For the first 24 hours, press down on the charms a few extra times to make sure they’re fully bonded.

6. You’re All Set! 📱💖

Your custom case is ready to shine. Go ahead—show it off and vibe it your way!

1. Prepare the Surface 🧼

Lay your laptop sleeve (or any fabric) flat on an ironing-safe surface. Make sure it's clean, dry, and free from any lint, dust, or moisture.

2. Plan Your Design 🧠

Place your TAGGZ (tags) on the sleeve without ironing to test the layout and final look. Take your time to get it just right.

3. Heat Things Up 🔥

Preheat your iron to a medium setting with no steam.

4. Apply the TAGGZ 🧲

Cover the patch with a thin cloth or parchment/baking paper. Press the iron firmly on top for 1 minute without moving it around. Make sure all edges are sealed.

5. Apply a heavy object on top and let it Cool ❄️

Allow the patch and fabric to cool for 2 minutes before moving it. This helps lock the bond in place.

6. You’re Ready to Roll ✨

You just got a serious upgrade. Vibe it your way!